Package: afio
Version: 2.4.2-2bo3.1
Priority: optional
Section: utils
Maintainer: Dirk Eddelbuettel <edd@debian.org>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/afio_2.4.2-2bo3.1.deb
Size: 43432
MD5sum: d11496a033719af051cea4a626e2e114
Description: Archive file manipulation program.
Afio manipulates groups of files, copying them within or between
filesystems and an afio archive.
.
Afio archives are portable as they contain only ASCII-formatted header
information. Afio makes cpio-format archives. Afio deals somewhat
gracefully with input data corruption. Afio supports multi-volume
archives during interactive operation. Afio can make compressed
archives that are much safer than compressed tar or cpio archives.
.
Afio is best used as an `archive engine' in a backup script.
installed-size: 81
Package: amanda-client
Version: 2.4.0.980319-0bo1.1
Priority: optional
Section: utils
Maintainer: Bdale Garbee <bdale@gag.com>
Depends: amanda-client, amanda-common, libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0
Suggests: awk, gnuplot
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/amanda-client_2.4.0.980319-0bo1.1.deb
Size: 96354
MD5sum: 1f4e350f34f1873de5dcdee5bfae418f
Description: Advanced Maryland Automatic Network Disk Archiver (Client)
Amanda is a backup system designed to archive many computers on a
network to a single large-capacity tape drive. This package is
suitable for large amounts of data to backup. For smaller solutions
take a look at afbackup, tob, taper, ...
.
Features:
* will back up multiple machines in parallel to a holding disk, blasting
finished dumps one by one to tape as fast as we can write files to
tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
with a large holding disk can be filled by Amanda in under 4 hours.
* built on top of standard backup software: Unix dump/restore, and
later GNU Tar and others.
* does simple tape management: will not overwrite the wrong tape.
* supports tape changers via a generic interface. Easily customizable
to any type of tape carousel, robot, or stacker that can be controlled
via the unix command line.
* for a restore, tells you what tapes you need, and finds the proper
backup image on the tape for you.
* recovers gracefully from errors, including down or hung machines.
* reports results, including all errors in detail, in email to operators.
* will dynamically adjust backup schedule to keep within constraints:
no more juggling by hand when adding disks and computers to network.
* includes a pre-run checker program, that conducts sanity checks on both
the tape server host and all the client hosts (in parallel), and will
send an e-mail report of any problems that could cause the backups to
fail.
* can compress dumps before sending or after sending over the net, with
either compress or gzip.
* can optionally syncronize with external backups, for those large
timesharing computers where you want to do full dumps when the system
is down in single-user mode (since BSD dump is not reliable on active
filesystems): Amanda will still do your daily dumps.
* lots of other options; Amanda is very configurable.
.
THIS PACKAGE RELIES ON A RUNNING AMANDA SERVER IN YOUR NETWORK.
.
For a quick start read the README.client.debian in /usr/doc/amanda-client.
.
Explanation of suggested programs:
- awk and gnuplot are needed for plotting statistics of backups
installed-size: 201
source: amanda
Package: amanda-common
Version: 2.4.0.980319-0bo1.1
Priority: optional
Section: utils
Maintainer: Bdale Garbee <bdale@gag.com>
Depends: netbase (>=3.03), tar (>=1.12)
Suggests: amanda-server (= 2.4.0.980319-0bo1.1) | amanda-client (= 2.4.0.980319-0bo1.1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/amanda-common_2.4.0.980319-0bo1.1.deb
Size: 119726
MD5sum: c05929ff9aae8e6a5acdd4719f87f85e
Description: Advanced Maryland Automatic Network Disk Archiver (Libs)
This package contains libraries required by the amanda client and
server packages.
installed-size: 249
source: amanda
Package: amanda-server
Version: 2.4.0.980319-0bo1.1
Priority: optional
Section: utils
Maintainer: Bdale Garbee <bdale@gag.com>
Depends: amanda-common, amanda-server, libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0
Suggests: perl, awk, gnuplot, amanda-client (>= 2.4.0.980319-0bo1.1)
Conflicts: amanda
Replaces: amanda
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/amanda-server_2.4.0.980319-0bo1.1.deb
Size: 193392
MD5sum: 75c4f203f2ef80ec654b585f2c945e91
Description: Advanced Maryland Automatic Network Disk Archiver (Server)
Amanda is a backup system designed to archive many computers on a
network to a single large-capacity tape drive. This package is
suitable for large amounts of data to backup. For smaller solutions
take a look at afbackup, tob, taper, ...
.
Features:
* will back up multiple machines in parallel to a holding disk, blasting
finished dumps one by one to tape as fast as we can write files to
tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
with a large holding disk can be filled by Amanda in under 4 hours.
* built on top of standard backup software: Unix dump/restore, and
later GNU Tar and others.
* does simple tape management: will not overwrite the wrong tape.
* supports tape changers via a generic interface. Easily customizable
to any type of tape carousel, robot, or stacker that can be controlled
via the unix command line.
* for a restore, tells you what tapes you need, and finds the proper
backup image on the tape for you.
* recovers gracefully from errors, including down or hung machines.
* reports results, including all errors in detail, in email to operators.
* will dynamically adjust backup schedule to keep within constraints:
no more juggling by hand when adding disks and computers to network.
* includes a pre-run checker program, that conducts sanity checks on both
the tape server host and all the client hosts (in parallel), and will
send an e-mail report of any problems that could cause the backups to
fail.
* can compress dumps before sending or after sending over the net, with
either compress or gzip.
* can optionally syncronize with external backups, for those large
timesharing computers where you want to do full dumps when the system
is down in single-user mode (since BSD dump is not reliable on active
filesystems): Amanda will still do your daily dumps.
* lots of other options; Amanda is very configurable.
.
For a quick start read the README.server.debian in /usr/doc/amanda.
.
Explanation of suggested programs:
- perl is needed for some non essential server utilities
- awk and gnuplot are needed for plotting statistics of backups
- to backup the tape server, you need to install the client too
installed-size: 501
source: amanda
Package: apcalc
Version: 2.10.3t5.45-0bo2
Maintainer: Martin Buck <mbuck@debian.org>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/apcalc_2.10.3t5.45-0bo2.deb
Size: 810818
MD5sum: 96808a13b8eaf80c0df4d5d38f4de9fa
Description: Arbitrary precision calculator (original name: calc)
Calc is an arbitrary precision arithmetic system that uses a C-like
language. Calc is useful as a calculator, an algorithm prototyper and as a
mathematical research tool. More importantly, calc provides one with a
machine independent means of computation. Calc comes with a rich set of
builtin mathematical and programmatic functions.
.
Calc is built on top of the library libcalc that represents numeric values
as fractions reduced to their lowest terms. This library can also be used
to add arbitrary precision capabilities to your own programs and is
available in the Debian package `apcalc-dev'.
.
The original name of this package is `calc', but it had to be changed to
`apcalc' for Debian, because there's already another package called `calc'
in Debian. Nevertheless, the binary and manpage installed by this package
are still named `calc'.
installed-size: 2444
Package: apcalc-dev
Version: 2.10.3t5.45-0bo2
Maintainer: Martin Buck <mbuck@debian.org>
Depends: libc5-dev
Suggests: apcalc
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/apcalc-dev_2.10.3t5.45-0bo2.deb
Size: 358142
MD5sum: 47eb16e1ae771bfb6ecc216824da92b2
Description: Library for arbitrary precision arithmetic
This package contains the library libcalc.a and the necessary header files
which provide routines to handle arbitrary precision arithmetic with
integers, rational numbers, or complex numbers. There are also many numeric
functions such as factorial and gcd, along with some transcendental
functions such as sin and exp.
.
This library is also used by the commandline calculator `calc', which is
provided in the Debian package `apcalc'.
installed-size: 981
source: apcalc
Package: bash
Version: 2.01-0bo5.3
Priority: required
Section: base
Essential: yes
Maintainer: Guy Maor <maor@debian.org>
Pre-Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libreadline2 (>= 2.1-2bo4), ncurses3.0, libreadline2 (>=2.1-2bo4)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/bash_2.01-0bo5.3.deb
Size: 431932
MD5sum: a160109d28a84d7fbf9d4e3c1209a269
Description: The GNU Bourne Again SHell
Bash is an sh-compatible command language interpreter that executes
commands read from the standard input or from a file. Bash also
incorporates useful features from the Korn and C shells (ksh and csh).
.
Bash is ultimately intended to be a conformant implementation of the
IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).
installed-size: 681
Package: bash-builtins
Version: 2.01-0bo5.3
Priority: optional
Section: utils
Maintainer: Guy Maor <maor@debian.org>
Depends: bash (>=2.01)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/bash-builtins_2.01-0bo5.3.deb
Size: 77488
MD5sum: 4a55ad45c06f5a60a49290bf6f2b5e7d
Description: Bash loadable builtins - headers & examples
Bash 2 can dynamically load new builtin commands. Included are the
necessary headers to compile your own builtins and lots of examples.
installed-size: 245
source: bash
Package: bind
Version: 8.1.2-0.bo1
Priority: extra
Section: net
Maintainer: Johnie Ingram <johnie@debian.org>
Depends: libc5 (>= 5.4.0-0), netbase
Recommends: dnsutils
Suggests: bind-doc
Replaces: netstd (<<2.00)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/bind_8.1.2-0.bo1.deb
Size: 347430
MD5sum: 6bdf59635366a47ea1bd81c3032352e6
Description: An Internet domain name server
The Berkeley Internet Name Domain (BIND) implements an
Internet name server for Unix operating systems. The BIND
consists of a server (or `daemon') called `named' and a
resolver library. A name server is a network service that
enables clients to name resources or objects and share this
information with other objects in the network. This in
effect is a distributed data base system for objects in a
computer network. The BIND server runs in the background,
servicing queries on a well known network port.
installed-size: 938
Package: bitchx
Version: 0.74p2-4bo1.1
Priority: optional
Section: net
Maintainer: Johnie Ingram <johnie@debian.org>
Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), ncurses3.0
Provides: irc, bitchx-bin, bitchx-doc, bitchx-lib
Replaces: bitchx-bin, bitchx-doc, bitchx-lib
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/bitchx_0.74p2-4bo1.1.deb
Size: 724372
MD5sum: 58373e1215cf1ad83892098128f6351d
Description: Advanced Internet Relay Chat client
This is the bleeding edge of IRC software -- the most common
functions normally done by scripts are coded into the client itself.
It contains dozens of features such as:
.
* Built-in ANSI color (this is probably the biggest feature)
* Ease of use -- dozens of useful command aliases to reduce typing
* Built-in notify, protection, and bot lists
* Built-in mass commands and tools
* Extended set of DCC commands and built-in CDCC offering
* Extended scripting functionality, including unique functions
* Code is based on ircII-Plutonium and more recent ircII-EPiC
.
Online linux help is available at irc.debian.org.
installed-size: 1779
source: ircii-pana
Package: buffer
Version: 1.17-0bo1
Maintainer: Martin Buck <mbuck@debian.org>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/buffer_1.17-0bo1.deb
Size: 11080
MD5sum: 7072c10329c47c80f5227ae4548234e9
Description: Buffering/reblocking program for tape backups, printing, etc.
Buffer implements double buffering and can be used to keep backup tapes
streaming or printers printing. It can also be used to convert a data
stream to a given output blocksize.
.
Buffer uses shared memory to convert a variable input data rate to a
constant output data rate. It is typically used in a pipe between a backup
program and the tape device, but there are also other applications like
buffering printer data in lpd's input filter.
installed-size: 29
Package: data-dumper
Version: 2.07-0bo1.1
Priority: optional
Section: interpreters
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Depends: perl
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/data-dumper_2.07-0bo1.1.deb
Size: 14292
MD5sum: 988fcaf5a611255fcf19fe8f585b7f71
Description: Store and retrieve perl data structures
You may find this module useful if you:
.
* are writing an application that must display perl data
structures.
.
* want to store some data structures to disk, in either a
compact or perl readable format (Dumper outputs pure perl,
so you don't have to invent your own portable data format, or
parse it; simply "do FILE" or read the data back in with
perl and eval() it). See the MLDBM module for an example of
one such use.
.
* want a simple, yet powerful, persistence engine that can be
quickly integrated into your application, and is a breeze to
debug.
.
* want a facility to make copies of data, or quickly find
differences between data structures.
installed-size: 66
Package: debhelper
Version: 0.55bo1
Maintainer: Joey Hess <joeyh@master.debian.org>
Depends: perl, fileutils (>= 3.16-4)
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/debhelper_0.55bo1.deb
Size: 44748
MD5sum: bc763e47482568300b63e14eb895b35e
Description: helper programs for debian/rules
A collection of programs that can be used in a debian/rules file to
automate common tasks. Programs are included to install various files into
your package, compress files, fix file permissions, integrate your package
with the debian menu system, etc.
installed-size: 115
Package: dnsutils
Version: 8.1.2-0.bo1
Priority: standard
Section: net
Maintainer: Johnie Ingram <johnie@debian.org>
Conflicts: netstd (<<2.00)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/dnsutils_8.1.2-0.bo1.deb
Size: 193580
MD5sum: c20d211503f9f13d370cabd768a679e0
Description: Utilities for querying the DNS
This package includes the "nslookup", "dig", and "host" programs
for querying information from the Domain Name System (DNS). It
also includes several short aliases (mx, ns, soa, zone, aaaa)
for querying specific information.
installed-size: 479
source: bind
Package: epic
Version: 3.004-4bo1
Priority: optional
Section: net
Maintainer: David N. Welton <davidw@efn.org>
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/epic_3.004-4bo1.deb
Size: 432060
MD5sum: 049fa0ae05871bbb92c5346849b436d5
Description: Modified ircII client with additional functionality
EPIC is 100% backwards compatable with ircII becuase EPIC *is* ircII.
EPIC was originally built upon the ircII-2.6 client and has maintained
faithfulness to remain current up to the 2.8.2 release.
EPIC is somewhat larger than the stock client (24%), but that is mostly
because of the multitude of new features, the dual ANSI/K&R compliant
function headers, and the large amount of re-written code in an attempt
to make ircii faster, more efficient, and more powerful.
installed-size: 1564
Package: fileutils
Version: 3.16-4bo1.1
Priority: required
Section: base
Essential: yes
Maintainer: Galen Hazelwood <galenh@micron.net>
Pre-Depends: libc5 (>= 5.4.0-0)
Conflicts: color-ls
Replaces: color-ls, util-linux (<= 2.7.1-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/fileutils_3.16-4bo1.1.deb
Size: 418206
MD5sum: ad7614664b38ffa66eadcd0518581f36
Description: GNU file management utilities.
The utilities: chgrp chmod chown cp dd df dir dircolors du install ln
ls mkdir mkfifo mknod mv rm rmdir touch vdir.
installed-size: 1114
Package: giflib-bin
Version: 3.0-4.3
Priority: extra
Section: non-free
Maintainer: Andreas Jellinghaus <aj@dungeon.inka.de>
Depends: giflib3 (= 3.0-4.3), libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0)
Conflicts: libgif3-bin
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/giflib-bin_3.0-4.3_i386.deb
Size: 88010
MD5sum: 5d68e3d386616afa7dc1a1878ba44f9d
Description: programs to convert GIF images
These are some programs that use giflib to convert images.
installed-size: 313
source: giflib
Package: giflib3
Version: 3.0-4.3
Priority: extra
Section: non-free
Maintainer: Andreas Jellinghaus <aj@dungeon.inka.de>
Depends: libc5
Conflicts: libgif3g, libgif2
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/giflib3_3.0-4.3_i386.deb
Size: 15988
MD5sum: 11ececa7afde61fcab53c407892ced56
Description: shared library for GIF images (runtime lib)
This is a shared library for working with GIF images.
installed-size: 40
source: giflib
Package: giflib3-dev
Version: 3.0-4.3
Priority: extra
Section: non-free
Maintainer: Andreas Jellinghaus <aj@dungeon.inka.de>
Depends: libc5-dev, giflib3 (= 3.0-4.3)
Conflicts: giflib-dev, giflib3g-dev, libgif-dev, libgif3g-dev, libgif2-dev
Provides: giflib-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/giflib3-dev_3.0-4.3_i386.deb
Size: 48826
MD5sum: d00cb4b0d84c7832d54f0e8d70d44a09
Description: shared library for GIF images (development files)
This package contains header files needed to compile programs that use
giflib.
installed-size: 99
source: giflib
Package: gmp1
Version: 1.3.2-8
Priority: extra
Section: libs
Maintainer: Dale Scheetz <dwarf@polaris.net>
Depends: libc6
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/gmp1_1.3.2-8.deb
Size: 55312
MD5sum: 521fee2583f85762c21d61ad4678fdbf
Description: Multiprecision arithmetic library
GNU MP is a programmer's library for arbitrary precision
arithmetic (ie, a bignum package). It can operate on signed
integers and rational numbers.
.
It has a rich set of functions, and the functions have a regular
interface.
.
Programs you build using GNU MP become covered by the GNU
General Public Licence (GPL) because of the way GNU MP is licensed.
installed-size: 109
Package: gmp1-dev
Version: 1.3.2-8
Priority: extra
Section: devel
Maintainer: Dale Scheetz <dwarf@polaris.net>
Depends: gmp1
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/gmp1-dev_1.3.2-8.deb
Size: 65960
MD5sum: 79f50267cbcf3c584b5ef7f525801df9
Description: Multiprecision arithmetic library developers tools.
This development package provides the header files and the symbolic
links to allow compilation and linking of programs that use the libraries
provided in the gmp1 package.
installed-size: 244
source: gmp1
Package: gnuplot
Version: 3.5beta6.340-0bo1
Priority: optional
Section: math
Maintainer: tibor simko <simko@debian.org>
Depends: libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0, svgalib1 (>= 1:1.2.10-2), xlib6 (>= 3.3-0)
Recommends: c-shell
Suggests: suidmanager
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/gnuplot_3.5beta6.340-0bo1.deb
Size: 996002
MD5sum: fc1578a1ad25a7863323289c05c7961c
Description: A command-line driven interactive plotting program.
Package for making 2D and 3D graphs from data and functions.
Supports lots of output formats, including drivers for many printers,
(La)TeX, (x)fig, X11, PostScript, and so on.
.
Data files and self-defined functions can be manipulated by internal
C-like language. Can perform smoothing, spline-fitting, or nonlinear
fits. Can work with complex numbers.
installed-size: 1843
Package: groff
Version: 1.11a-0bo2
Priority: important
Section: text
Maintainer: Fabrizio Polacco <fpolacco@debian.org>
Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1)
Suggests: xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/groff_1.11a-0bo2.deb
Size: 964564
MD5sum: 379db3bca19f97d6d84b6a2f0232cacf
Description: GNU troff text-formatting system.
This package contains the traditional UN*X text formatting tools
troff, nroff, tbl, eqn and pic. These utilities, together with the
man package, are essential for displaying the on-line manual pages.
.
Output can be produced in a number of formats including plain ASCII
and PostScript. All the standard macro packages are supported. A
number of other utilities are also included together with several fonts.
installed-size: 2917
Package: gs-aladdin
Version: 5.10-2bo3
Priority: optional
Section: non-free
Maintainer: Marco Pistore <pistore@di.unipi.it>
Depends: libc5 (>= 5.4.0-0), libjpeg6a, libpaper (>= 1.0.2-1), libpng1 (>= 0.88), svgalib1 (>= 1:1.2.10-2), xlib6 (>= 3.3-0)
Recommends: gsfonts (>=4.01-3)
Conflicts: gs, gs_x, gs_svga, gs_both
Provides: gs, gs_x, gs_svga, gs_both, postscript-viewer
Replaces: gs
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/gs-aladdin_5.10-2bo3.deb
Size: 1251548
MD5sum: a1d76348104e32f71fa76acc40260b26
Description: Postscript interpreter with X11 and svgalib preview support.
This version is Aladdin copyright, not GNU copyleft, see
/usr/doc/gs-aladdin/copyright.
.
Ghostscript is used for postscript preview and printing. Usually as
a back-end to a program such as ghostview, it can display postscript
documents in an X11 environment. It can also use the Linux svga
library to display documents graphically on the Linux console.
.
Furthermore, it can render postscript files as graphics to be printed
on non-postscript printers. Supported printers include common
dot-matrix, inkjet and laser models.
.
The Ghostscript World Wide Web home page is at
http://www.cs.wisc.edu/~ghost/index.html
.
This package also contains the hpdj driver contributed by
Martin Lottermoser.
installed-size: 2684
Package: gv
Version: 3.5.8-1bo4
Priority: optional
Section: text
Maintainer: Karl M. Hegbloom <karlheg@inetarena.com>
Depends: gs, libc5 (>= 5.4.0-0), xaw3d, xlib6 (>= 3.3-0)
Suggests: gs-aladdin
Conflicts: gv-2d, gv-3d
Provides: postscript-viewer, pdf-viewer
Replaces: gv-2d, gv-3d
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/gv_3.5.8-1bo4.deb
Size: 223028
MD5sum: 066377af47fdc70593006090a65d3297
Description: A PostScript and PDF viewer for X using 3d Athena Widgets
`gv' is a comfortable viewer of PostScript and PDF files for the X
Window System.
.
From version 3.0 on `gv' cannot be used with the standard Athena
Widget library. Nevertheless you don not have to use the 3d Widgets
for anything else as this version is compiled using `-rpath
/usr/X11R6/lib/Xaw3d'.
.
It uses the `gs' PostScript(tm) interpreter and is based on the
classic X front-end for `gs', `ghostview'. It is more comfortable and
more powerful than `ghostview'.
.
Some features as e.g. PDF files or anti-aliasing are only supported
if a recent Aladdin ghostscript (4.0 or later) is installed. With
anti-aliasing turned on, the text is very crisp and readable, with no
`stepping' on the slants at all. For this reason, the `gs-aladdin'
package, to be found in `non-free' due to Aladdin's licenceing, is
highly recommended.
.
The new `gs-aladdin', version (>= 4.0), can view PDF files. It is
mostly compliant with Adobe's PDF format, so it has less problems
than `xpdf'. There is no support for encrypted pdf files. It
provides much better output than `xpdf' and even `AcroRead' (Adobe's
PDF Reader) but is slower and does not yet support hyperlinks.
installed-size: 468
Package: hyphen-show
Version: 0.1-0bo1
Maintainer: Martin Buck <mbuck@debian.org>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/hyphen-show_0.1-0bo1.deb
Size: 8168
MD5sum: 8d25c7a23e48302f8bfc4ac934ca0afa
Description: Show hyphenations in DVI-files
hyphen_show scans a DVI-file, tries to find all hyhenations and writes them
to stdout. It is useful to check whether TeX's hyphenation algorithm really
did the good job it is supposed to do.
installed-size: 24
Package: ircii
Version: 2.9.3roof-2
Priority: optional
Section: net
Maintainer: Bernd Eckenfels <ecki@debian.org>
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/ircii_2.9.3roof-2.deb
Size: 343312
MD5sum: fbb335d1df09ba267c8e5d9ac184e0df
Description: Internet Relay Chat client
The ircII program is a full screen, termcap based interface
to Internet Relay Chat. It gives full access to all
of the normal IRC functions, plus a variety of additional
options.
installed-size: 1234
Package: isdnutils
Version: 1:2.1.beta1-15bo17
Priority: extra
Section: net
Maintainer: Paul Slootman <paul@debian.org>
Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libgdbm1, ncurses3.0, tcl76, xlib6 (>= 3.3-0), makedev (>>1.6-10), suidmanager, netbase (>= 2.14), sox
Suggests: ppp, tcpdump (>= 3.3.1a2-1)
Conflicts: vbox, isdnlog, ipppd, xisdnutils
Replaces: vbox
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/isdnutils_2.1.beta1-15bo17.deb
Size: 1073066
MD5sum: 19eabd207f0a6010eb1c01d1c0ac1ac4
Description: isdn utilities
This package includes everything you need to run ISDN: interface
controlling programs, an ISDN logging tool, a voice box program,
a synchronous PPP daemon, an ISDN load viewer, and much more.
.
This package will only run with 2.0.31 or 2.0.32 (and possibly higher) kernels.
installed-size: 2115
Package: jove
Version: 4.16-1bo2
Priority: optional
Section: editors
Maintainer: Loic Prylli <lprylli@graville.fdn.fr>
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/jove_4.16-1bo2.deb
Size: 165698
MD5sum: ca14781bb80721f044f960d06763831d
Description: JOVE is Jonathan's Own Version of Emacs, a small and powerful editor.
It has the same interface as the original EMACS editor written at
MIT by Richard Stallman. Although JOVE is meant to be compatible with
EMACS for usual commands, there are some major differences between the two
editors. It is a very light editor (~100Kbyte), good replacement for vi.
installed-size: 432
Package: kdebase
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: menu (>=1.5-5), giflib3, kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), mesa2 (>= 2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdebase_Beta2-2.1_i386.deb
Size: 1894236
MD5sum: 7535d3e67c6015f47879f5cd477a4f07
Description: KDE core applications
This is a suite of all kde core applications :
file manager kfm, window manager kwm, desktop manager kdm
and others.
installed-size: 5738
Package: kdegames
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdegames_Beta2-2.1_i386.deb
Size: 1159172
MD5sum: 039fac2a42158ab2959a2a6ca4d76312
Description: KDE games collection
This is a collection of several games written for kde.
installed-size: 3840
Package: kdegraphics
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: kdebase, giflib3, kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdegraphics_Beta2-2.1_i386.deb
Size: 536664
MD5sum: 603492e1ce2662cfcfd3892d1c49d3db
Description: KDE collection of graphics programs.
This collections includes kfax kfractint kghostview kpaint kview
installed-size: 1564
Package: kdelibs0
Version: 1:Beta2-2.1
Priority: extra
Section: contrib
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: libc5, libg++27, giflib3, libjpeg6a, qt1 (>= 1.3), xlib6 (>= 3.3-0)
Conflicts: libkde0.9.00, libkde0, kdeapps
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdelibs0_Beta2-2.1_i386.deb
Size: 440356
MD5sum: 4427f6685df46f7959182eebaad99950
Description: KDE core libraries (runtime files)
KDE core libraries.
You need these files to run kde applications.
installed-size: 1341
source: kdelibs
Package: kdelibs0-dev
Version: 1:Beta2-2.1
Priority: extra
Section: contrib
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: libc5-dev, kdelibs0 (= 1:Beta2-2.1)
Suggests: kdebase
Conflicts: kdelibs-dev, libkde0-dev, libkde0.9.00-dev
Provides: kdelibs-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdelibs0-dev_Beta2-2.1_i386.deb
Size: 693668
MD5sum: 30b3eb3e3c976e869f10d48f0ba8b6a7
Description: KDE core libraries (development files)
KDE core libraries.
You need these files to compile kde applications.
installed-size: 2606
source: kdelibs
Package: kdemultimedia
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdemultimedia_Beta2-2.1_i386.deb
Size: 124828
MD5sum: f9edf01e9bc943598d4b03d46c9cf498
Description: KDE multimedia package
This is a collection of kde programms related to multimedia :
kmix - a mixer,
kscd - a cd program,
kmedia - a music player
installed-size: 450
Package: kdenetwork
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: giflib3, kdelibs0 (=1:Beta2-2.1), kdesupport0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), libgdbm1, qt1(>= 1.30), xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdenetwork_Beta2-2.1_i386.deb
Size: 420878
MD5sum: 36ac31defba40df6d07dd4d545cbd998
Description: KDE mail and news clients
KDE has a mail client (kmail) and a news client (krn) available via
this package. KDE is the K desktop project (see www.kde.org).
installed-size: 1268
Package: kdesupport0
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdesupport0_Beta2-2.1_i386.deb
Size: 102956
MD5sum: ced48b9053f8cf2e1dba916ce92141e1
Description: mime and uuencode/decode library - runtime version
This library is used by kde to handle mime types and uuencoding/decoding.
installed-size: 275
source: kdesupport
Package: kdesupport0-dev
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: libc5-dev, kdesupport0 (=1:Beta2-2.1)
Conflicts: kdesupport-dev
Provides: kdesupport-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdesupport0-dev_Beta2-2.1_i386.deb
Size: 204330
MD5sum: 85dd68f723b0f3529c1abc33c784c54c
Description: mime and uuencode/decode library - development version
This library is used by kde to handle mime types and uuencoding/decoding.
installed-size: 770
source: kdesupport
Package: kdeutils
Version: 1:Beta2-2.1
Priority: optional
Section: non-free
Maintainer: Andreas Jellinghaus <aj@debian.org>
Depends: kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/kdeutils_Beta2-2.1_i386.deb
Size: 322502
MD5sum: 23ff67b7ece622b66c8d9e8652c2310d
Description: collection of usefull kde utilities
this collection includes karm kcalc kedit khexdit kjots knotes kzip
(calculator, editor, hex editor ...)
installed-size: 1080
Package: lftp
Version: 0.13.1-0bo1
Priority: optional
Section: net
Maintainer: Nicolás Lichtmaier <nick@feedback.net.ar>
Depends: libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0, netbase
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/lftp_0.13.1-0bo1.deb
Size: 113192
MD5sum: febb74416178f4d3e9c6c70edeb2005b
Description: Sophisticated command-line FTP client programs
The main two advantages over other ftp clients are reliability and ability
to perform tasks in background. It will reconnect and reget the file being
transferred if the connection broke. You can start a transfer in background
and continue browsing on the ftp site. It does this all in one process. When
you have started background jobs and feel you are done, you can just exit
lftp and it automatically moves to nohup mode and completes the transfers.
It has also such nice features as reput and mirror.
.
This package also includes:
* ftpget - a simple non-interactive tool for downloading files
* parallelftp - Uses several connections to download single file. It can
be useful to download a file ASAP trough a busy link.
installed-size: 246
Package: libc5
Version: 5.4.38-1
Priority: required
Section: base
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Pre-Depends: ldso (>=1.7.14-2)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libc5_5.4.38-1.deb
Size: 283926
MD5sum: 977d7f72af3e6e5318a2fd282822e64d
Description: The Linux C library version 5 (run-time libraries).
Includes shared libraries needed to run programs built with libc 5.
These libraries are modified to make them work better in a libc6
environment.
installed-size: 665
source: libc
Package: libc5-altdbg
Version: 5.4.38-1
Priority: optional
Section: oldlibs
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Depends: libc5-altdev (=5.4.38-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libc5-altdbg_5.4.38-1.deb
Size: 1215870
MD5sum: 71bf007b3ad8a553d31cc5881b0c6b9d
Description: The Linux C library version 5 (alternative debug files).
Includes a static libraries compiled with debugging info.
This package can be used to debug libc5 even when the libc6-dev package
is installed.
installed-size: 5822
source: libc
Package: libc5-altdev
Version: 5.4.38-1
Priority: standard
Section: oldlibs
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Depends: libc5 (=5.4.38-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libc5-altdev_5.4.38-1.deb
Size: 889472
MD5sum: 7344800997a9e72ddbfb26acc0f4c137
Description: The Linux C library version 5 (alternative dev files).
Includes libc headers, kernel headers (v2.0.29) and static
libraries. This package can be used to build libc5-base binaries
even when the libc6-dev package is installed.
installed-size: 3601
source: libc
Package: libc5-dbg
Version: 5.4.38-1
Priority: optional
Section: devel
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Depends: libc5-dev (=5.4.38-1)
Conflicts: libc (<<4.6.27-11), libc-dev
Provides: libc-dev
Replaces: ppp (<<2.2.0f-22)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libc5-dbg_5.4.38-1.deb
Size: 1215858
MD5sum: 5bce1633b8149e52e9aa1f5394a70e4d
Description: The Linux C library version 5 (debug files).
Includes static libraries compiled with debugging info.
This package can be used to debug libc5.
installed-size: 5821
source: libc
Package: libc5-dev
Version: 5.4.38-1
Priority: standard
Section: devel
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Depends: libc5 (=5.4.38-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libc5-dev_5.4.38-1.deb
Size: 889360
MD5sum: 8132222aa565bdd067f025261c749b8d
Description: The Linux C library version 5 (dev files).
Includes libc headers, kernel headers (v2.0.29) and static
libraries.
installed-size: 3600
source: libc
Package: libcgi-perl
Version: 2.76-2bo1.1
Maintainer: Manoj Srivastava <srivasta@debian.org>
Depends: perl, libwww-perl
Conflicts: CGI-modules
Replaces: perl, CGI-modules
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/libcgi-perl_2.76-2bo1.1.deb
Size: 125374
MD5sum: 3d3d64d156991174f86a74d5d52d536b
Description: modules for perl5, for use in writing CGI scripts.
In addition to this package, you will also need the URI::Unescape
class, which is part of the libwww-perl package. This is the
replacement for the now obsolete CGI-modules package.
.
This package is destined to replace libcgi-pm-perl, but at the moment
libcgi-pm-perl (as in the library CGI.pm) serves as the rapid
prototyping version, and may be more featureful than this package.
.
This perl 5 library uses objects to create Web fill-out forms on the
fly and to parse their contents. It provides a simple interface for
parsing and interpreting query strings passed to CGI scripts.
However, it also offers a rich set of functions for creating fill-out
forms. Instead of remembering the syntax for HTML form elements, you
just make a series of perl function calls. An important fringe benefit
of this is that the value of the previous query is used to initialize
the form, so that the state of the form is preserved from invocation
to invocation.
installed-size: 317
Package: libcurses-perl
Version: 1.01-0bo1.1
Maintainer: John Goerzen <jgoerzen@complete.org>
Depends: perl (>= 5.004), libc5 (>= 5.4.0-0), ncurses3.0
Conflicts: perl-curses
Provides: perl-curses
Replaces: perl-curses
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libcurses-perl_1.01-0bo1.1.deb
Size: 40274
MD5sum: 37eeb5f02b2220eff86ccff3bed4980f
Description: Curses interface for Perl
libcurses-perl (the Curses module from CPAN) will let you
use the ncurses/curses terminal screen manipulation
routines from Perl programs.
.
This package was previously called perl-curses. To comply with informal
Debian standards, it has been renamed to libcurses-perl.
installed-size: 128
Package: libdbd-msql-perl
Version: 0.91-1bo1.1
Priority: optional
Section: contrib
Maintainer: Martin Schulze <joey@debian.org>
Depends: perl (>=5.004.04-1), libdbi-perl (>=0.84-1), libc5 (>= 5.4.0-0), libmsql1 (>= 1.0.16-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libdbd-msql-perl_0.91-1bo1.1.deb
Size: 36162
MD5sum: bd953c7efb47a3aeaa7c882e133b918d
Description: Perl interface to mSQL databases
This package provides an interface between the perl programming
language and the mSQL programming API that comes with the mSQL
relational database management system. It is based on the DBI
interface for Perl 5
.
You can connect to multiple mSQL database servers and send multiple
queries to any of them via an simple object oriented interface. Two
types of objects are available: database handles and statement
handles.
installed-size: 77
source: msql-modules
Package: libdbd-mysql-perl
Version: 1.1826-0bo2.1
Priority: extra
Section: contrib
Maintainer: Ben Gertzfield <che@debian.org>
Depends: libc5 (>= 5.4.0-0), perl (>=5.004.04), libdbi-perl
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libdbd-mysql-perl_1.1826-0bo2.1.deb
Size: 133124
MD5sum: 6b16e0aa2d83fb6ecdeea61f49b2add9
Description: mySQL 1.x interface for Perl 5
This package contains a mySQL interface for Perl 5 based on
the DBI interface.
installed-size: 314
Package: libdbi-perl
Version: 0.92-0bo2.1
Priority: extra
Section: contrib
Maintainer: Ben Gertzfield <che@debian.org>
Depends: perl (>=5.004.04-3)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libdbi-perl_0.92-0bo2.1.deb
Size: 156196
MD5sum: 54a46883b5f76bd67be71d9112505893
Description: The Perl5 Database Interface by Tim Bunce
This DBI interface is not yet fully specified. The current development
work is focused on writing drivers, such as DBD::Oracle, which also
implement emulations of old perl4 database interfaces, e.g., oraperl.
This strategy enables the DBI and drivers to serve a useful purpose
whilst allowing the real interface to evolve with experience behind the
emulation interface.
installed-size: 348
Package: libmime-base64-perl
Version: 2.03-0bo1.1
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Depends: perl (>=5.004.02-2), libc5 (>= 5.4.0-0)
Replaces: libwww, libwww-perl
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libmime-base64-perl_2.03-0bo1.1.deb
Size: 11934
MD5sum: f251b94e7757721df4e7fdb7b1d0ed2b
Description: MIME/Base64 decoding for Perl
Libmime-base64-perl is a collection of Perl modules which provide
simple and consistent methods for dealing with Base64 encoding.
installed-size: 48
Package: libmime-perl
Version: 3.204-0bo1.1
Maintainer: Dirk Eddelbuettel <edd@debian.org>
Depends: perl, libwww-perl, mailtools
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/libmime-perl_3.204-0bo1.1.deb
Size: 230326
MD5sum: 033b43debba849780ae825036e2c101a
Description: Perl5 modules for MIME-compliant messages (MIME-tools)
MIME-tools is a collection of Perl5 MIME:: modules for parsing,
decoding, and generating single- or multipart (even nested multipart)
MIME messages.
installed-size: 602
Package: libmsql1
Version: 1.0.16-7bo1.1
Priority: optional
Section: non-free
Maintainer: Martin Schulze <joey@debian.org>
Depends: libc5 (>= 5.4.0-0)
Suggests: msql | msqld
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libmsql1_1.0.16-7bo1.1.deb
Size: 53388
MD5sum: 5e55ec196269a5d01c894793ebaf5dcc
Description: MiniSQL library [libc6]
This package contains the shared mSQL library together with header
files and manual pages.
installed-size: 108
source: msql
Package: libnet-perl
Version: 1.0502-0bo1.1
Priority: optional
Section: interpreters
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Depends: perl (>=5.003.07), data-dumper
Conflicts: libnet
Provides: libnet
Replaces: libnet
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/libnet-perl_1.0502-0bo1.1.deb
Size: 66002
MD5sum: 02428606a22e9bd630cdc388406e165e
Description: Implementation of Internet protocols for Perl
libnet contains Perl implementations of the following protocols:
Net::FTP (RFC959), Net::SMTP (RFC821), Net::Telnet (RFC854),
Net::Time (RFC867 & RFC868), Net::NNTP (RFC977), Net::POP3 (RFC1939),
Net::SNPP (RFC1861)
It also contains various utility functions for implementing new
protocols.
installed-size: 305
Package: libpgjava
Version: 6.2.1-11bo1.1
Priority: optional
Section: contrib
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Depends: jdk1.1-runtime (>= 1.1.3.v2-1), libpgsql
Suggests: postgresql-doc
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libpgjava_6.2.1-11bo1.1.deb
Size: 33472
MD5sum: 13f677316cfc1db15085c016448f7f50
Description: JDBC Java class archive for PostgreSQL.
A java class archive of classes that enable communication with
the PostgreSQL database backend using JDBC.
installed-size: 91
source: postgresql
Package: libpgperl
Version: 6.2.1-11bo1.1
Priority: optional
Section: libs
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpgsql, libreadline2 (>= 2.1), ncurses3.0, perl (>= 5.004), libpgsql
Suggests: postgresql-doc
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libpgperl_6.2.1-11bo1.1.deb
Size: 23680
MD5sum: 07747b1e0029f6ede23f4b16ccaa4b19
Description: Perl modules for PostgreSQL.
A library to enable Perl scripts to communicate with the
PostgreSQL database backend.
installed-size: 90
source: postgresql
Package: libpgsql
Version: 6.2.1-11bo1.1
Priority: optional
Section: libs
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Suggests: postgresql-doc
Conflicts: libpq1,postgres95
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libpgsql_6.2.1-11bo1.1.deb
Size: 21752
MD5sum: 0b0b7ac4dd7f268811b4315c5268e8a6
Description: Shared library for PostgreSQL
C and C++ libraries to enable user programs to communicate with
the PostgreSQL database backend. The backend can be on another machine and
accessed through TCP/IP.
.
This library is used by all PostgreSQL programs.
installed-size: 57
source: postgresql
Package: libpgtcl
Version: 6.2.1-11bo1.1
Priority: optional
Section: libs
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpgsql, libreadline2 (>= 2.1), ncurses3.0, tcl80, tk80, libpgsql
Suggests: postgresql-doc
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libpgtcl_6.2.1-11bo1.1.deb
Size: 41324
MD5sum: 61560f6deb7f2865b7f92dcce852e288
Description: Tcl/Tk library and front-end for PostgreSQL.
A library to enable Tcl/Tk scripts to communicate with the
PostgreSQL database backend. A frontend script, pgaccess.tcl, is included.
installed-size: 179
source: postgresql
Package: libreadline2
Version: 2.1-2bo7.3
Priority: required
Section: base
Maintainer: Guy Maor <maor@debian.org>
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libreadline2_2.1-2bo7.3.deb
Size: 69214
MD5sum: 6b81090bc7ecf5aff6591ecb54901e9d
Description: GNU readline and history libraries, run-time libraries.
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
installed-size: 169
source: bash (2.01-0bo5.3)
Package: libreadline2-dbg
Version: 2.1-2bo7.3
Priority: optional
Section: devel
Maintainer: Guy Maor <maor@debian.org>
Depends: libreadline2-dev (= 2.1-2bo7.3)
Conflicts: libreadline-dbg
Provides: libreadline-dbg
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libreadline2-dbg_2.1-2bo7.3.deb
Size: 180536
MD5sum: 2b25889425b8f2d5f826c6f33f31ad22
Description: GNU readline and history libraries, debugging libraries.
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
installed-size: 613
source: bash (2.01-0bo5.3)
Package: libreadline2-dev
Version: 2.1-2bo7.3
Priority: standard
Section: devel
Maintainer: Guy Maor <maor@debian.org>
Depends: libreadline2 (= 2.1-2bo7.3), libc5 (>= 5.4.0-0), ncurses3.0, libc5-dev
Conflicts: libreadline-dev
Provides: libreadline-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libreadline2-dev_2.1-2bo7.3.deb
Size: 138462
MD5sum: d672e79c68ab1cf2e39fc3c5c34a0cac
Description: GNU readline and history libraries, development files.
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
installed-size: 333
source: bash (2.01-0bo5.3)
Package: libterm-readkey-perl
Version: 2.09-1bo1.1
Maintainer: Kai Henningsen <kai@debian.org>
Depends: perl, libc5 (>= 5.4.0-0)
Conflicts: libtermreadkey-perl
Provides: libtermreadkey-perl
Replaces: adbbs, libtermreadkey-perl
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libterm-readkey-perl_2.09-1bo1.1.deb
Size: 18274
MD5sum: 35a8ce4e1980d24f64a81429fdba1387
Description: Change terminal modes, and perform non-blocking reads
This module, Term::ReadKey, provides ioctl control for terminals so the input
modes can be changed (thus allowing reads of a single character at a time),
and also provides non-blocking reads of stdin, as well as several other
terminal related features, including retrieval/modification of the screen
size, and retrieval/modification of the control characters.
installed-size: 74
Package: libtime-hires-perl
Version: 1.16-0bo1.1
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Depends: perl (>=5.004)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/libtime-hires-perl_1.16-0bo1.1.deb
Size: 10058
MD5sum: c26a047b2aa514ceba50b8b45f5e7534
Description: High-resolution time manipulation in perl
Libtime-hires-perl is a Perl module for dealing with high-resolution
time interfaces.
installed-size: 34
Package: libwww-perl
Version: 5.17-0bo1.1
Priority: optional
Section: interpreters
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Depends: perl (>=5.002), libnet-perl, libmime-base64-perl
Recommends: libmd5-perl
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/libwww-perl_5.17-0bo1.1.deb
Size: 252554
MD5sum: 6b26ae2abd2d76b3f13c63f7a2064351
Description: WWW client/server library for Perl
Libwww-perl is a collection of Perl modules which provides a simple
and consistent programming interface (API) to the World-Wide Web. The
main focus of the library is to provide classes and functions that
allow you to write WWW clients, thus libwww-perl said to be a WWW
client library. The library also contain modules that are of more
general use, as well as a simple HTTP/1.1-compatible server
implementation.
installed-size: 1107
Package: lyx
Version: 1:0.12.0-2bo0.1
Priority: optional
Section: contrib
Maintainer: Paul Seelig <pseelig@goofy.zdv.uni-mainz.de>
Depends: libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0), xpm4.7 (>= 3.4g-0)
Recommends: latex, dvips, tetex-base|ltxgraph
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/lyx_0.12.0-2bo0.1.deb
Size: 1218670
MD5sum: b50ee24cb7564caddb7c4197bfe7c612
Description: High Level Word Processor (BETA version)
LyX is an almost WYSIWYG-frontend for LaTeX that runs under the X Window
System. It makes the power and typesetting quality of LaTeX available for
people who are used to word processors. Since LyX supports LaTeX's concept
of general mark-ups, it is even easier and faster to create professional
quality documents with it than with usual word processors. It is also
possible to use LaTeX-commands within LyX, so nothing of LaTeX's power is
lost.
.
Note that LyX is still under development. It may still have some bugs. But
it is already very usable.
installed-size: 4424
Package: mailtools
Version: 1.09-0bo1.1
Priority: optional
Section: mail
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Depends: perl, libnet
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/mailtools_1.09-0bo1.1.deb
Size: 38756
MD5sum: c2958d11d55f827ea2d713a5958d003f
Description: Mainpulate email in perl
This is a set of perl modules which provide an easy interface to
manipulating email in an object-oriented fashion.
installed-size: 193
Package: man-db
Version: 2.3.10-59bo61
Priority: important
Section: doc
Maintainer: Fabrizio Polacco <fpolacco@debian.org>
Depends: groff, libc5 (>= 5.4.0-0), libdb1 (>= 1.85.4-4)
Suggests: bsdmainutils
Conflicts: man, man-aeb
Provides: man, man-browser
Replaces: man, man-aeb, nlsutils
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/man-db_2.3.10-59bo61.deb
Size: 269152
MD5sum: a95ba04a1cec67b55152acbea29a041b
Description: Display the on-line manual.
This packages provides the man command, this utility is the primary
way of examining the on-line help files (manual pages). Other utilities
provided include the whatis and apropos commands for searching the
manual page database; the manpath utility for determining the manual
page search path and the maintenance utilities mandb, catman and
zsoelim. This package uses the groff suit of programs to format and
display the manual pages.
installed-size: 559
Package: mc
Version: 4.1.27-1bo1
Priority: optional
Section: utils
Maintainer: Paul Seelig <pseelig@goofy.zdv.uni-mainz.de>
Depends: e2fsprogs (>=1.06-1), libc5 (>= 5.4.0-0), libgpm1 (>= 1.10-1), ncurses3.0, slang0.99.34 (>=0.99.38)
Suggests: gpm
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/mc_4.1.27-1bo1.deb
Size: 391084
MD5sum: f206ed0fa72eb35e484ac6a02d01db05
Description: Midnight Commander - A powerful file manager.
Midnight Commander is a feature-rich file manager. It has mouse support in
a linux console and in an xterm. It started as a Norton Commander clone but
now it is far superior to it. Among other things it can do FTP, includes a
hexeditor, comes with an internal editor which can be invoked separately as
'mcedit' and lets you do most system administration tasks.
Browsing, unpacking and installation of Debian packages is possible by just
pressing enter on a *.deb file. Handling of other archive formats like rpm,
zip, zoo and tar.gz is equally supported. This version comes with undelete
for ext2 filesystems compiled in.
installed-size: 800
Package: menu
Version: 1.5-5.1
Priority: optional
Section: admin
Maintainer: joost witteveen <joostje@debian.org>
Depends: libc5 (>= 5.4.0-0)
Conflicts: pdmenu (<=0.5.9)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/menu_1.5-5.1_i386.deb
Size: 299190
MD5sum: 03354f0b6be7170832529bb33d15dd02
Description: provides update-menus functions for some applications
The intent of this package is to streamline the menu's (like the
fvwm2 ones) in debian. For this purpose, it provides a "update-menus"
programme, that will check for new menu files (as provided by
other packages in /usr/lib/menu), and run the install programmes
in /etc/menu-methods of the various window managers (or console menu's,
like pdmenu) on the new menufiles.
Also in this package are a couple menu entries, as an
example. The system admin can easily override these, as can any
package maintainer.
installed-size: 1084
Package: mh
Version: 6.8.4-13bo18
Priority: standard
Section: mail
Maintainer: Philip Hands <phil@hands.com>
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Recommends: mail-transport-agent
Suggests: exmh
Provides: mail-reader
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/mh_6.8.4-13bo18.deb
Size: 1220810
MD5sum: d2cc835bfff7db529a8ce4572f739857
Description: A set of electronic mail handling programs.
Unlike most mail user agents, MH is not a single program, rather it
is a set of program that are run from the shell. This allows the user
to utilize the full power of the Unix shell in coordination with MH.
.
This package is not being actively maintained upstream.
I recomend you use the largely equivalent nmh package instead.
installed-size: 2964
Package: mh-papers
Version: 6.8.4-13bo18
Priority: optional
Section: mail
Maintainer: Philip Hands <phil@hands.com>
Recommends: tex, latex
Suggests: mh
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/mh-papers_6.8.4-13bo18.deb
Size: 307892
MD5sum: 520828cac080a7b0b5ea92b73dcdddef
Description: Documentation for the MH mail handling programs
There is a considerable quantity of tutorial and background
documentation for MH (in TeX format) that has been separated
into this package to avoid bloating the main MH package.
installed-size: 459
source: mh
Package: mlddc
Version: 3.2.2-0bo3
Priority: optional
Section: net
Maintainer: <john@dhh.gt.org>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/mlddc_3.2.2-0bo3.deb
Size: 8844
MD5sum: df19597dd8d53f4af54a563e2b699279
Description: A client for the Monolith dynamic DNS.
mlddc is a client for the Monolith ( http://www.ml.org )
dynamic DNS ( DYNDNS, http://www.ml.org/dyndns/ ) service.
It updates the ML database and nameservers with the current IP.
installed-size: 28
Package: msql
Version: 1.0.16-7bo1.1
Priority: optional
Section: non-free
Maintainer: Martin Schulze <joey@debian.org>
Depends: libc5 (>= 5.4.0-0)
Suggests: bc
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/msql_1.0.16-7bo1.1.deb
Size: 136024
MD5sum: 0ace29e97fe28d2e8b905c8c6129662c
Description: MiniSQL clients
This package contains some frontends programs for the mSQL
database engine. These programs need not necessarily be
installed on the database server.
installed-size: 188
Package: msqld
Version: 1.0.16-7bo1.1
Priority: optional
Section: non-free
Maintainer: Martin Schulze <joey@debian.org>
Depends: libc5 (>= 5.4.0-0), msql
Suggests: smail | mail-transport-agent
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/msqld_1.0.16-7bo1.1.deb
Size: 56892
MD5sum: 186a2b39919d7a1a945464be24269971
Description: MiniSQL engine
MiniSQL is an ANSI-SQL database that is offered to the public
under a limited commercial license.
.
mSQL has been designed to provide fast access to stored data with low
memory requirements. As its name implies mSQL (or MiniSQL) offers a
subset of ANSI-SQL as its query interface. Although it only supports
a subset of SQL, everything it supports is in accordance with the
ANSI SQL specification.
installed-size: 152
source: msql
Package: msqlperl
Version: 1:0.91-1bo1.1
Priority: optional
Section: non-free
Maintainer: Martin Schulze <joey@debian.org>
Depends: perl (>=5.004.04-1), libc5 (>= 5.4.0-0), libmsql1 (>= 1.0.16-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/msqlperl_0.91-1bo1.1.deb
Size: 50394
MD5sum: e38b1e880384efa023dd7ed6978485ec
Description: Perl library for accessing mSQL databases
This Perl library provides an interface between the Perl programming
language and the mSQL programming API that comes with the mSQL
relational database management system. All functions provided by the
mSQL programming API are supported.
.
You can connect to multiple mSQL database servers and send multiple
queries to any of them via an simple object oriented interface. Two
types of objects are available: database handles and statement
handles.
installed-size: 115
source: msql-modules (0.91-1bo1.1)
Package: mutt
Version: 0.88-1bo1
Maintainer: J.H.M. Dassen <jdassen@wi.LeidenUniv.nl>
Depends: libc5 (>= 5.4.0-0), slang0.99.34 (>=0.99.38), mail-transport-agent
Recommends: mime-support, ispell
Suggests: pgp
Provides: mail-reader
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/mutt_0.88-1bo1.deb
Size: 230356
MD5sum: 6c669c1793211486939aba4c1b425dc7
Description: Text-based mailreader supporting MIME, PGP and threading.
Mutt is a sophisticated text-based Mail User Agent. Some highlights:
o MIME support (including RFC1522 encoding/decoding of 8-bit message
headers).
o PGP/MIME support (RFC 2015).
o POP3 support.
o Mailbox threading (both strict and non-strict).
o Default keybindings are much like ELM.
o Keybindings are configurable; Mush and PINE-like ones are provided as
examples.
o Handles MMDF, MH and maildir in addition to regular mbox format.
o Messages may be (indefinitely) postponed.
o Colour support.
o Highly configurable through easy but powerful rc file.
installed-size: 404
Package: mysql
Version: 3.21.19.beta-0bo1.1
Maintainer: Scott Hanson <shanson@debian.org>
Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), libreadline2 (>= 2.1), ncurses3.0
Suggests: mysql-manual
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/mysql_3.21.19.beta-0bo1.1.deb
Size: 1831442
MD5sum: aa90edbc4df7abd8bb6c0a6cc0b6c9c5
Description: SQL database server
mysql is a SQL (Structured Query Language) database server. mysql
was written by Michael (monty) Widenius. See the CREDITS file in the
distribution for more credits for mysql and related things.
.
Please make sure to read README.debian if you are upgrading from
3.20.xx!
installed-size: 4387
Package: patch
Version: 2.5-0bo1
Priority: standard
Section: utils
Maintainer: Darren Stalder <torin@daft.com>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/patch_2.5-0bo1.deb
Size: 70144
MD5sum: 2a20dec2dd27720d0e4213963e894312
Description: Apply a diff file to an original
Patch will take a patch file containing any of the four forms
of difference listing produced by the diff program and apply
those differences to an original file, producing a patched
version.
installed-size: 108
Package: perl
Version: 5.004.04-2bo1.1
Priority: important
Section: interpreters
Maintainer: Darren Stalder <torin@daft.com>
Pre-Depends: perl-base (>=5.004.04-2)
Depends: perl-base (=5.004.04-2bo1.1)
Suggests: perl-suid, perl-debug
Conflicts: io
Provides: io
Replaces: io
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/perl_5.004.04-2bo1.1.deb
Size: 2999758
MD5sum: adced8bc91311ea26588c6fd772bc496
Description: Larry Wall's Practical Extracting and Report Language.
An interpreted scripting language, known among some as "Unix's
Swiss Army Chainsaw".
.
Perl is optimized for scanning arbitrary text files and system
administration. It has built-in extended regular expression matching
and replacement, a dataflow mechanism to improve security with
setuid scripts and is extendable via modules that can interface
to C libraries.
.
Note that this supplements perl-base, providing the full Perl
distribution.
installed-size: 6558
Package: perl-base
Version: 5.004.04-2bo1.1
Essential: yes
Maintainer: Darren Stalder <torin@daft.com>
Pre-Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libdb1, libgdbm1
Suggests: perl
Replaces: perl
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/perl-base_5.004.04-2bo1.1.deb
Size: 476134
MD5sum: e9143a212ec63f3b3034ceea4b7e65f9
Description: The Pathologically Eclectic Rubbish Lister
A scripting language with delusions of full language-hood, Perl is used
in many system scripts and utilities.
.
This is a stripped down Perl with only essential libraries. To make
full use of Perl, you'll want to install the 'Perl' package which
supplements this one.
installed-size: 1116
source: perl
Package: perl-debug
Version: 5.004.04-2bo1.1
Priority: optional
Section: interpreters
Maintainer: Darren Stalder <torin@daft.com>
Depends: perl (=5.004.04-2bo1.1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/perl-debug_5.004.04-2bo1.1.deb
Size: 1308878
MD5sum: 7c581e3c596db0c866febf2e0aba2a17
Description: Allow debugging Perl scripts (and Perl).
Truly extensive and exhaustive output is possible with different settings.
installed-size: 3988
source: perl
Package: perl-suid
Version: 5.004.04-2bo1.1
Priority: standard
Section: interpreters
Maintainer: Darren Stalder <torin@daft.com>
Depends: perl (=5.004.04-2bo1.1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/perl-suid_5.004.04-2bo1.1.deb
Size: 235140
MD5sum: 2a4fc48d99304ac06a8124d485537498
Description: Runs setuid Perl scripts.
This can be a security hole but it is much safer than shell scripts and
with -Tw can be much safer than setuid executables.
installed-size: 544
source: perl
Package: perl-tk
Version: 1:400.202-8bo1.1
Priority: optional
Section: interpreters
Maintainer: Rob Browning <rlb@cs.utexas.edu>
Depends: perl (>=5.004)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/perl-tk_400.202-8bo1.1.deb
Size: 1584800
MD5sum: c2f834f295d1c1371cf033df16f15215
Description: Perl module providing the Tk graphics library.
A good place to get started is by running the "widget" demo that's
installed with this package.
installed-size: 4785
Package: perlmenu
Version: 4.0-0bo1.1
Maintainer: John Goerzen <jgoerzen@complete.org>
Depends: perl-curses, perl (>= 5.003)
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/perlmenu_4.0-0bo1.1.deb
Size: 81710
MD5sum: 2108cf17863a5dce1620ae666ffcdb9d
Description: Menu and Template (curses-based) UI for Perl
perlmenu is a Perl module that provides your application
with access to easy-to-use functions for templates,
menus, forms, and the like -- everything needed
to put a slick UI on a program without resorting to
a GUI.
installed-size: 196
Package: perlsgml
Version: 1996Oct09-5bo1.1
Priority: optional
Section: text
Maintainer: Susan G. Kleinmann <sgk@kleinmann.com>
Depends: perl|perl-base
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/perlsgml_1996Oct09-5bo1.1.deb
Size: 81372
MD5sum: b589428f87d7016872f7df0f033fe147
Description: perlSGML is a suite of HTML analysis tools from Earl Hood.
dtd2html produces an HTML document starting from an SGML DTD that permits
an easy hypertext navigation through the given DTD.
.
dtddiff compares two DTDs and shows possible differences.
.
dtdtree shows visually the hierarchical tree structure characterizing
the relations between the various elements of a DTD.
.
dtdview is an interactive program for studying an SGML DTD.
.
stripsgml strips a text from its SGML markup, and attempts to translate
entity references by standard ASCII characters.
installed-size: 343
Package: postgresql
Version: 6.2.1-11bo1.1
Priority: optional
Section: misc
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpgsql, libreadline2 (>= 2.1), ncurses3.0,libpgsql
Recommends: postgresql-doc
Suggests: libpgperl,libpgjava,libpgtcl
Conflicts: postgres95,libpq1
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/postgresql_6.2.1-11bo1.1.deb
Size: 619298
MD5sum: 8f2a13ec4a3f785c6588301e86957f2f
Description: Object-relational SQL database, descended from POSTGRES.
[WARNING: because of the risk of data loss, this package _conflicts_
with earlier major releases. DO NOT FORCE A REPLACEMENT.]
.
PostgreSQL is the successor to Postgres95 and ultimately of
POSTGRES. It is an object-relational database, which supports a subset
of SQL-92 that grows with every release.
.
The original POSTGRES was developed at Berkeley as a research project and
used its own postquel retrieval language, which is now nearly replaced
by SQL.
installed-size: 1398
Package: postgresql-dev
Version: 6.2.1-11bo1.1
Priority: optional
Section: devel
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Depends: libpgsql
Suggests: postgresql-doc
Conflicts: postgres95-dev,postgres95,libpq1
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/postgresql-dev_6.2.1-11bo1.1.deb
Size: 109536
MD5sum: f5c5096c05c5cf8ee6fbe091bf4dcc85
Description: Header files for libpq (postgresql library)
Header files for compiling C and C++ programs to link
with the libpgsql libraries in order to communicate with the PostgreSQL
database backend.
installed-size: 283
source: postgresql
Package: postgresql-doc
Version: 6.2.1-11bo1.1
Priority: optional
Section: doc
Maintainer: Oliver Elphick <Oliver.Elphick@lfix.co.uk>
Suggests: doc-linux-html
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/postgresql-doc_6.2.1-11bo1.1.deb
Size: 369292
MD5sum: a1437557e59413f69fa63af8ca0972a2
Description: Documentation for the PostgreSQL database.
Contains all README files, user manual and examples for all PostgreSQL
packages.
.
(Although the user manual is useful, it is seriously out of
date in parts. A project is underway to remedy this. Sorry...)
installed-size: 481
source: postgresql
Package: ppp
Version: 2.3.5-0bo0.1
Priority: optional
Section: net
Maintainer: Philip Hands <phil@hands.com>
Depends: libc5 (>= 5.4.0-0), netbase
Suggests: ppp-pam
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/ppp_2.3.5-0bo0.1.deb
Size: 156848
MD5sum: 54c0f3d811b07ca09a4fefb41b41cc7f
Description: Point-to-Point Protocol (PPP) daemon.
The Point-to-Point Protocol (PPP) provides a standard way to
transmit datagrams over a serial link, as well as a standard
way for the machines at either end of the link (the "peers")
to negotiate various optional characteristics of the link. Using
PPP, a serial link can be used to transmit Internet Protocol (IP)
datagrams, allowing TCP/IP connections between the peers.
installed-size: 308
Package: ppp-pam
Version: 2.3.5-0bo0.1
Priority: standard
Section: net
Maintainer: Philip Hands <phil@hands.com>
Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpam0 (>= 0.56-1), netbase, ppp (=2.3.5-0bo0.1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/ppp-pam_2.3.5-0bo0.1.deb
Size: 52994
MD5sum: b5c40c5914ff37692d813fb397906f81
Description: Point-to-Point Protocol (PPP) daemon with PAM support.
This package contains just the pppd binary, with PAM support included
.
This is excluded from the normal ppp package to save space on the
boot disks. You should install this if you have ppp installed
installed-size: 116
source: ppp
Package: procmail
Version: 3.10.7-0bo6
Priority: standard
Section: mail
Maintainer: Santiago Vila <sanvila@ctv.es>
Depends: libc5 (>= 5.4.0-0), debianutils (>= 1.6)
Recommends: smail | sendmail | mail-transport-agent | fetchmail
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/procmail_3.10.7-0bo6.deb
Size: 118244
MD5sum: 8ceaae2e488c7cdafab8ce3136594abc
Description: Versatile e-mail processor.
Can be used to create mail-servers, mailing lists, sort your incoming
mail into separate folders/files (real convenient when subscribing to one
or more mailing lists or for prioritising your mail), preprocess your
mail, start any programs upon mail arrival (e.g. to generate different
chimes on your workstation for different types of mail) or selectively
forward certain incoming mail automatically to someone.
.
Note: This release is based on procmail-g3.11pre7.
installed-size: 215
Package: proftpd
Version: 1.0.0-4bo1.1
Priority: optional
Section: net
Maintainer: Johnie Ingram <johnie@debian.org>
Depends: netbase (>= 2.0), libc5 (>= 5.4.0-0)
Conflicts: wu-ftpd
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/proftpd_1.0.0-4bo1.1.deb
Size: 148462
MD5sum: c615cc382dea47674443cfd052a22c64
Description: Versatile, virtual-hosting FTP daemon
A powerful replacement for wu-ftpd, this daemon supports hidden
directories, virtual hosts, and per-directory ".ftpaccess" files.
It uses a single main configuration file, with a syntax similar to
Apache.
.
Because of the advanced design, anonymous-FTP directories can have
an arbitrary internal structure (bin, lib, etc, and special files are
not needed).
.
More information can be found at http://www.proftpd.org/.
installed-size: 369
Package: qt-dev
Version: 1.31-1.4
Priority: optional
Section: non-free
Maintainer: Heiko Schlittermann <heiko@lotte.sax.de>
Depends: libc-dev, qt1 (>= 1.31-1.4), libc5 (>= 5.4.0-0)
Recommends: qt-doc (>= 1.31-1.4)
Conflicts: qt0-dev
Replaces: qt0-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/qt-dev_1.31-1.4_i386.deb
Size: 965026
MD5sum: acc5fb067f8e684820c333e5ad3f32af
Description: Environment for QT GUI development.
QT is a complete framework for development of GUI, based on a set of
C++ classes. The header files, manual pages, and *moc*,
qt's own meta object compiler (?) are included as well
as a static version of the library. For examples,
more (html'd) doc, and a complete tutorial consider installing
the qt-doc package.
installed-size: 2746
source: qt1
Package: qt-doc
Version: 1.31-1.4
Priority: optional
Section: non-free
Maintainer: Heiko Schlittermann <heiko@lotte.sax.de>
Suggests: qt-dev (>= 1.31-1.4), www-browser
Conflicts: qt0-doc
Replaces: qt0-doc
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/qt-doc_1.31-1.4_all.deb
Size: 972890
MD5sum: 24dab015cf1e990a7d429f3187555822
Description: Comprehensive docs (html), examples, and tutorial for QT.
QT is a complete framework for development of GUI, based on a set of
C++ classes. A rich set of examples, a complete tutorial.
installed-size: 4697
source: qt1
Package: qt1
Version: 1.31-1.4
Priority: optional
Section: non-free
Maintainer: Heiko Schlittermann <heiko@lotte.sax.de>
Depends: xlib6, libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0)
Provides: qt
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/qt1_1.31-1.4_i386.deb
Size: 417876
MD5sum: 88a8929e8a3ecff239cea2ab2dca81b1
Description: Shared Library used by applications linked with libqt.
QT is a library and framework for GUI developement. If you've
applications linked against the shared library *libqt* you'll need
to install this package. For own development using QT you should
install the qt-dev and probably the qt-doc package.
installed-size: 1066
Package: qt1-dev
Version: 1.33-0bo5.1
Priority: optional
Section: non-free
Maintainer: Heiko Schlittermann <heiko@lotte.sax.de>
Depends: libc5-dev, qt1 (>= 1.33-0bo5.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1)
Recommends: qt-doc (>= 1.33-0bo5.1)
Conflicts: qt0-dev, qt-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/qt1-dev_1.33-0bo5.1.deb
Size: 978030
MD5sum: ae8bb125e314c96fefbe1f7c86efe78a
Description: Environment for QT GUI development.
QT is a complete framework for development of GUI, based on a set of
C++ classes. The header files, manual pages, and *moc*,
qt's own meta object compiler (?) are included as well
as a static version of the library. For examples,
more (html'd) doc, and a complete tutorial consider installing
the qt-doc package.
installed-size: 2632
source: qt1
Package: rsync
Version: 1.7.1-0bo1
Priority: optional
Section: net
Maintainer: Philip Hands <phil@hands.com>
Depends: libc5 (>= 5.4.0-0)
Suggests: ssh
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/rsync_1.7.1-0bo1.deb
Size: 55074
MD5sum: 2a5d270eb92095aca38aa46c404ef2cb
Description: fast remote file copy program (like rcp)
rsync is a program that allows files to be copied to and from remote
machines in much the same way as rcp. It has many more options than
rcp, and uses the rsync remote-update protocol to greatly speedup
file transfers when the destination file already exists.
.
The rsync remote-update protocol allows rsync to transfer just the
differences between two sets of files across the network link.
installed-size: 109
Package: smartlist
Version: 3.10.7-2bo5
Priority: optional
Section: mail
Maintainer: Santiago Vila <sanvila@ctv.es>
Depends: libc5 (>= 5.4.0-0), procmail, mail-transport-agent
Recommends: base-passwd (>= 1.3.0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/smartlist_3.10.7-2bo5.deb
Size: 89512
MD5sum: 1b57b2b6e34e3dc430b590559f790c8f
Description: Versatile and Intelligent List Processor
SmartList is a mailing list manager built on top of the procmail
mail processing package. Some features: * Enough intelligence to overcome
the ignorance of some subscribers (will direct subscribe and unsubscribe
requests away from the regular list and automatically onto the -request
address). * No hardwired format for (un)subscribe requests (i.e. new
subscribers need not be educated, unsubscribing users do not need to
remember any particular syntax). *Intelligent* autoremoval of addresses
from the list that cause too many bounces. * Duplicate submissions are
eliminated automatically. * You can set up a mailinglist to function as
a standalone mail archive server.
.
Note: This release is based on smartlist-g3.11pre7.
installed-size: 241
Package: staroffice3
Version: 3.1-6bo1.1
Priority: optional
Section: contrib
Maintainer: Martin Schulze <joey@debian.org>
Depends: libc5 (>= 5.4.4-0), xlib6, xpm4.7, libg++27
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/staroffice3_3.1-6bo1.1.deb
Size: 22460
MD5sum: 2607a1f1901e56dc5b24d825a88299b6
Description: Star Office 3.1 installer
Star Office 3.1 is a suite of office productivity applications
containing the following
- StarWriter 3.1 (word processor)
- StarCalc 3.1 (spreadsheet)
- StarDraw 3.1 (graphics and presentation package)
- StarImage 3.1 (image manipulation)
- StarChart 3.1 (bar, pie and other charts)
- StarMath 3.1 (formula design)
.
StarOffice 3.1 makes heavy use of common code in shared libraries,
therefore using relatively few resources for the level of
functionality.
.
The StarOffice 3.1 binaries can be found in
ftp://ftp.gwdg.de/pub/linux/staroffice/
They need to be placed in /tmp or $TMP respectively.
installed-size: 62
source: staroffice3-installer
Package: tar
Version: 1.12-0bo2.1
Priority: required
Section: base
Essential: yes
Maintainer: Bdale Garbee <bdale@gag.com>
Pre-Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/tar_1.12-0bo2.1.deb
Size: 263270
MD5sum: db799d7744757afce6911aed6f7bc7a2
Description: GNU tar
Tar is a program for packaging a set of files as a single archive in tar
format. The function it performs is conceptually similar to cpio, and to
things like pkzip in the DOS world. It is heavily used by the Debian package
management system, and is useful for performing system backups and exchanging
sets of files with others.
installed-size: 564
Package: tcl80
Version: 8.0p2-0bo1
Priority: optional
Section: libs
Maintainer: David Engel <david@debian.org>
Depends: libc5
Conflicts: tcl, tcl74 (<=7.4p3-2)
Provides: tclsh
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/tcl80_8.0p2-0bo1.deb
Size: 292036
MD5sum: 3b934014e28fc8e664c714826dab050e
Description: The Tool Command Language (TCL) v8.0 - Run-Time Package.
TCL is a powerful, easy to use, interpreted scripting language.
installed-size: 637
Package: tcl80-dev
Version: 8.0p2-0bo1
Priority: optional
Section: devel
Maintainer: David Engel <david@debian.org>
Depends: libc5-dev, tcl80 (=8.0p2-0bo1)
Conflicts: tcl, tcl-dev
Provides: tcl-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/tcl80-dev_8.0p2-0bo1.deb
Size: 829842
MD5sum: 2a440779f332db8208570d7fa72a7ef7
Description: The Tool Command Language (TCL) v8.0 - Development Package.
TCL is a powerful, easy to use, interpreted scripting language.
installed-size: 1285
source: tcl80
Package: tk80
Version: 8.0p2-0bo1.1
Priority: optional
Section: libs
Maintainer: David Engel <david@debian.org>
Depends: libc5, tcl80, xlib6
Conflicts: tk, tk40 (<=4.0p3-2)
Provides: wish
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/tk80_8.0p2-0bo1.1.deb
Size: 617920
MD5sum: 12a16b43a1949d5ae48fba2288f26377
Description: The Tk toolkit for TCL and X11 v8.0 - Run-Time Package.
Tk is an X11 toolkit that provides the Motif look and feel and is
implemented using the Tcl scripting language.
installed-size: 1576
Package: tk80-dev
Version: 8.0p2-0bo1.1
Priority: optional
Section: devel
Maintainer: David Engel <david@debian.org>
Depends: libc5-dev, tcl80-dev, xlib6-dev, tk80 (=8.0p2-0bo1.1)
Conflicts: tk, tk-dev
Provides: tk-dev
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/tk80-dev_8.0p2-0bo1.1.deb
Size: 865958
MD5sum: 6657eb3e3a27dce23a64ad05bd63b14c
Description: The Tk toolkit for TCL and X11 v8.0 - Development Package.
Tk is an X11 toolkit that provides the Motif look and feel and is
implemented using the Tcl scripting language.
installed-size: 1428
source: tk80
Package: tkirc
Version: 1.151-1bo1.1
Priority: optional
Section: net
Maintainer: Martin Schulze <joey@debian.org>
Depends: wish, ircii (>=2.8-1)
Architecture: all
Filename: dists/bo/bo-unstable/binary-i386/tkirc_1.151-1bo1.1.deb
Size: 92034
MD5sum: 9ada95898df5f51c633af47b16724a39
Description: Tcl/Tk based client to the Internet Relay Chat
tkirc is a frontend for unix's ircII (shell-client for the Internet
Relay Chat) based on Tcl/Tk.
installed-size: 316
Package: vlock
Version: 1.0-7bo3
Priority: optional
Section: utils
Maintainer: Juan Cespedes <cespedes@debian.org>
Depends: libc5 (>= 5.4.0-0)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/vlock_1.0-7bo3.deb
Size: 10674
MD5sum: dd90a07786edf3bb53d1f49b1d41d027
Description: Virtual Console locking program
vlock is a program to lock one or more sessions on the Linux console.
This is especially useful for Linux machines which have multiple
users with access to the console. One user may lock his or her
session(s) while still allowing other users to use the system on
other virtual consoles. If desired, the entire console may be locked
and virtual console switching disabled.
installed-size: 24
Package: word2x
Version: 1.5-1bo1
Priority: optional
Section: text
Maintainer: David N. Welton <davidw@efn.org>
Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1)
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/word2x_1.5-1bo1.deb
Size: 29922
MD5sum: cecf7894808e34d3fdb9fa32deb98205
Description: Translates Word files into ascii text or LaTeX
Takes Word files and transforms them into ascii text or LaTeX
installed-size: 91
Package: wu-ftpd-academ
Version: 2.4.2.16-0bo5
Priority: optional
Section: net
Maintainer: Heiko Schlittermann <heiko@lotte.sax.de>
Depends: libc5 (>= 5.4.0-0), netbase (>= 2.0)
Conflicts: wu-ftpd
Replaces: wu-ftpd
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/wu-ftpd-academ_2.4.2.16-0bo5.deb
Size: 123994
MD5sum: 060e2d5ccb6b20b68cb1f3045206cb99
Description: A powerful replacement for the standard ftpd
wu-ftpd is a replacement ftp server for Un*x systems. Besides
supporting the ftp protocol defined in RFC 959, it adds the following
features:
o logging of transfers
o logging of commands
o on the fly compression and archiving
o classification of users on type and location
o per class limits
o per directory upload permissions
o restricted guest accounts
o system wide and per directory messages.
o directory alias
o cdpath
o filename filter
o virtual host support (similar to the apache httpd server)
.
This release is maintained by Academ Consulting Services as a public service
to the Internet.
installed-size: 253
Package: xlockmore
Version: 4.06.1-2bo1.1
Priority: optional
Section: x11
Maintainer: Dirk Eddelbuettel <edd@debian.org>
Depends: libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0)
Suggests: fortune
Conflicts: xlockmore-gl
Replaces: xlockmore-gl
Architecture: i386
Filename: dists/bo/bo-unstable/binary-i386/xlockmore_4.06.1-2bo1.1.deb
Size: 272956
MD5sum: 30993e688745bfae7bfd8a8cfec80a8b
Description: Lock X11 display until password is entered.
xlock locks the X server till the user enters his/her password at the
keyboard. While xlock is running, all new server connections are
refused. The screen saver is disabled. The mouse cursor is turned off.
The screen is blanked and a changing pattern is put on the screen. If
a key or a mouse button is pressed then the user is prompted for the
password of the user who started xlock. xlockmore extends the standard
xlock program by adding many more modes that are highly configurable.
.
Note that under XFree86, the X11 implementation for Linux, Control-
Alt-Backspace will defeat the locking mechanism and return your
console back unless you put "DontZap" in your XF86Config file. 'xdm'
returns to the login prompt. Control-Alt-F1 (among others) will
defeat locking mechanism with virtual terminals, so make sure that
you are not logged onto any virtual consoles.
.
This version is built without additional OpenGL/MesaGL and XPM modes. The
companion package xlockmore-gl does contain them.
installed-size: 599